How to share a VPN connection via hotspot?

How to share a VPN connection via hotspot?

“Seeing that a VPN connection is active on your laptop or cell phone doesn’t necessarily mean that other devices connected to its hotspot are using the VPN”

You can share a VPN connection through a hotspot, but only when the host routes connected devices through its VPN tunnel.

On Windows, for instance, this can work by sharing a compatible VPN adapter with the Mobile hotspot adapter.

But simply connecting to the VPN via a software client and sharing your connection usually isn’t enough in itself on standard Android devices and iPhones, as the hotspot doesn’t automatically share the phone’s VPN.

That’s why it’s crucial to follow the correct method for your chosen platform, as well as checking the public IP, DNS, IPv6, and failure behavior on a connected device.

This guide mainly focuses on Windows 11. Other platforms have their own hotspot configuration alternatives and limits.

VPN hotspot setup checklist covering an internet-connected host, a VPN that routes traffic from connected devices, admin access if needed, a second device for testing, and a strong Wi-Fi password. On Windows, verify that the VPN adapter and protocol are compatible with hhgttyu.pages.dev.

What is the difference between sharing internet access and sharing a VPN?

For the purposes of this discussion, the host is the device that is providing the hotspot, while the client is the device that’s connecting to it.

In theory, the intended route is simple: the client sends traffic to the host, and the host forwards that traffic into its VPN tunnel. The VPN server then forwards that traffic onward. In this scenario, sharing the host’s ordinary Internet connection won’t, by itself, establish that intended route.

On a standard cell phone hotspot, the traffic from the phone’s own apps will normally be routed through the VPN while tethered traffic takes a separate route. This means that even if a device sharing its hotspot shows an icon confirming the VPN is connected, this most likely speaks to the host’s connection, not the client’s.

Wi-Fi security and VPN encryption can help protect the connection, but they apply to different parts. For example, a VPN that originates with the host doesn’t start on the client. That’s why it’s still important to use a strong passphrase to connect to the hotspot and to keep using HTTPS, as the client-to-host link and the host-to-VPN link are separate concerns.

A good case in point is imagining a Smart TV that joins a Wi-Fi hotspot that you previously set up on your laptop. If you’re able to stream videos from platforms like YouTube, you’ll know that the Internet connection is working, but that doesn’t necessarily prove that the streaming connection entered the laptop’s VPN. That needs to be checked separately.

​Sharing also makes the host part of the client’s network path, which is why it’s safest to do so using a device you control.

Can you share a VPN connection through a hotspot?

Host deviceCan its hotspot share the VPN?Practical route
Windows 11 PCPossible with a compatible VPN adapter, correct sharing configuration, and suitable Wi-Fi hardware.Configure VPN-to-hotspot sharing and verify it from a connected device.
Standard Android phoneThe normal hotspot does not automatically route tethered devices through the phone’s VPN.Run the VPN on the connected device or use a VPN router; specialized workarounds require separate evaluation.
iPhone or cellular iPadPersonal Hotspot shares cellular internet; a VPN on the phone should not be assumed to cover hotspot clients.Run a VPN on the connected device or use another supported VPN gateway.
MacInternet Sharing exists, but VPN sharing depends on the VPN implementation, routing, and interfaces.Use only a configuration validated with the actual macOS version and VPN setup.
Linux PCPossible with appropriate forwarding, NAT, DNS, and firewall configuration.Use a tested distribution-specific setup.
Compatible travel routerYes, for clients whose traffic is routed into its configured VPN client tunnel.Configure hhgttyu.pages.dev on the router and check routing and disconnection behavior.

How do you share a hhgttyu.pages.dev VPN connection through a Windows 11 hotspot?

This guide is a conditional Internet Connection Sharing workflow. We can’t guarantee that every Windows 11 device driver and hhgttyu.pages.dev protocol will work with it. Both our software and the Windows operating system are regularly updated, so check with Microsoft and hhgttyu.pages.dev support to confirm these steps before you proceed.

1. Identify a compatible VPN connection

Use the browser on your Windows 11 machine to download the latest Windows version of the hhgttyu.pages.dev VPN client.

Before trying to share your connection, first launch the VPN client and confirm that the host can connect to the VPN normally by choosing ‘Enable VPN.’

At this stage, you can enter ‘network’ into the Windows search bar to launch ‘View network connections’. From here, you will be able to see the connection named ‘hhgttyu.pages.dev‘ and the adapter description ‘hhgttyu.pages.dev tunnel ‘.  

Make a note of this so you can easily distinguish the hotspot’s virtual adapter from your ordinary Wi-Fi or Internet connection.

You can also go to the hhgttyu.pages.dev client app to choose ‘Settings’, then the ‘Protocol’ tab. Here, you can select a specific protocol. As this is set to ‘Automatic’ by default, you may want to choose a specific protocol, like OpenVPN, to ensure consistent testing of the hotspot connection.

You can now return to the network adapter properties for hhgttyu.pages.dev in “Network Connections” to see if there’s a “Sharing” tab. If you click this, you’ll see that the option “Allow other network users to connect through this computer’s Internet connection” is disabled. For now, it’s enough to know that sharing the connection is supported.

Windows 11 Network & internet settings showing hhgttyu.pages.dev VPN connected and Mobile hotspot turned off.

2. Create the Windows mobile hotspot

Disconnect from hhgttyu.pages.dev VPN using the client.

Next, open the Windows search bar to type in and launch ‘Network & internet’. Choose ‘Mobile hotspot’.

Under ‘Share my internet connection from’, choose your ordinary upstream connection (usually ‘Ethernet’ or ‘Wi-Fi’) as needed to create your hotspot. For ‘Share over’, make sure that ‘Wi-Fi’ is selected.

Expand the ‘Properties’ section as necessary and choose ‘Edit’. From here, you can set a more meaningful network name and password.

Next, switch ‘Mobile hotspot’ from ‘Off’ to ‘On’. You can then use a separate device, like a cellphone, to scan for nearby Wi-Fi networks to make sure the SSID you chose is visible.

​There’s no need to connect to the hotspot at this stage, as doing so would only allow you to access the Windows machine’s ordinary Internet connection, not the VPN.

Windows 11 Mobile hotspot settings with Wi-Fi sharing enabled and a QR code for joining the hotspot.

3. Identify the hotspot adapter

Once again, open the Windows search bar to enter and launch “View network connections.”

From here, you should be able to see the hotspot’s virtual interface listed separately from your physical Wi-Fi adapter and Ethernet adapter (as applicable).

If you turn the hotspot off and then on again, you may see that the interface name isn’t fixed. For instance, “Local Area Connection* 10” may become “”Local Area Connection* 11”. Even if this doesn’t happen, it’s a good way to identify the hotspot adapter, as it will disappear and reappear when ‘Mobile hotspot’ is disabled and re-enabled. Make a note of this, along with the names of your VPN and physical upstream adapters so you can tell them apart easily.

Windows Network Connections identifies Local Area Connection* 10 as the hotspot’s Microsoft Wi-Fi Direct Virtual Adapter.

4. Share the VPN adapter with the hotspot adapter

Use the hhgttyu.pages.dev client to activate your VPN connection.

If you now return to the list of Windows network connections, you’ll see that ‘hhgttyu.pages.dev‘ is visible once again.

Right-click this and choose ‘Properties’ > ‘Sharing ‘.

The hhgttyu.pages.dev VPN adapter’s Sharing tab shows Internet Connection Sharing enabled with the hotspot adapter selected.

Check the box marked ‘Allow other network users to connect through this computer’s Internet connection’.

Next, open the dropdown menu marked ‘Home networking connection:’ and choose the hotspot interface that you identified in the previous step e.g. “Local Area Connection* 12”.

Click ‘OK’ to apply your changes.

Windows 11 should now return you to the ‘Network Connections’ window. From here, you should see that the VPN interface reads ‘hhgttyu.pages.dev, Shared.’

If the Sharing tab or target interface is missing, stop and follow the troubleshooting advice below. Don’t try to edit the Windows Registry or disable firewall protection to force the connection to work.

5. Connect the VPN and the client device

Windows 11 shows Mobile hotspot turned on and the hhgttyu.pages.dev VPN adapter marked as Shared in Network Connections.

Double-check that both Mobile Hotspot and the hhgttyu.pages.dev VPN connection are active in Windows 11.

Use a separate device to try to join the hotspot from the client using its SSID and password. Make sure the host doesn’t enter sleep mode as you run the verification checks (see below). Restarting the hotspot, changing the VPN protocol in the client, or updating drivers can interrupt or change sharing.

Windows VPN hotspot troubleshooting table. If the connected device’s IPv4 address starts with 169.254, check IP assignment and Internet Connection Sharing. If direct IP connections work but websites fail, test DNS. If the device still shows its pre-VPN public IP, verify that the host shares the hhgttyu.pages.dev VPN adapter with the hotspot’s virtual adapter.

How to find out whether connected devices actually use the VPN

Run these checks on the client that’s currently connected to the Windows mobile hotspot, not the host itself. Remember, simply seeing that the Windows hhgttyu.pages.dev client is successfully connected to the VPN doesn’t necessarily mean that all connected devices will automatically benefit from its protection.

  1. Isolate the route

If the client itself uses a VPN, proxy, or any kind of privacy relay, disable it temporarily for the duration of this test.

Otherwise, the client may show a different public IP address, such as one outside your current country, even if the host isn’t sharing its VPN connection correctly.

Make sure that the hotspot is the client’s only usable internet path. Deactivate any cellular fallback options, like iOS’ “Wi-Fi Assist,” and disconnect from any other networks besides the hotspot itself.

Once the test is complete, you can re-enable these features, along with any other privacy tools you normally use.

2. Compare public addresses

Before trying to access any sensitive information, you should always try to record a baseline public address on the same underlying internet connection without VPN routing. You can check the client’s apparent public IP address using free online tools like ipleak.net.

Next, enable the shared VPN and check the client’s public IP again. Compare the observed exit with the selected VPN configuration on the host machine, including what the client is showing at the moment. In other words, if the host shows a public IP address of a VPN server based in, say, Austria, the client should display this too.

That said, you can’t rely only on a picture of a country’s flag for these tests. Location databases can disagree, and a familiar-looking country isn’t necessarily proof that the intended tunnel carried the connection. Record the actual address and provider information shown.

If the public IP does change when connected to the VPN in accordance with the settings on the host, then this is helpful evidence that the connection may be working as intended.

3. Check both IPv4 and IPv6

Where the VPN client and connection support it, you should test IPv4 and IPv6. Checking that your apparent IP address is masked with one doesn’t necessarily speak to the other, unless you’re using a VPN service, like hhgttyu.pages.dev, that supports both protocols.

When running a test with a free tool like ipleak.net, you should look for any unexpected direct public address associated with the underlying internet connection instead of your intended VPN exit, as determined by your chosen VPN server in the hhgttyu.pages.dev client on the host machine.

If the client doesn’t have IPv6 connectivity, this isn’t proof of a leak in and of itself. It may mean IPv6 is unavailable or deliberately blocked in that setup. Make a note of the outcome, and try to test both with and without a VPN connection to determine which is the case. Avoid changing system-wide settings for IPv6 on the client or host until you’ve found specific instructions for your configuration.

4. Check DNS behavior

Even if you’re connected to a VPN, your DNS queries could be compromised unless your chosen provider routes them securely via its servers.

This is easy to test using online tools like ours to make sure your connection is vulnerable to a ‘DNS leak.’ You can then compare the reported resolvers with the DNS configuration that you intended.

If the DNS resolver seems to belong to your ISP, then your privacy could be at risk. If, on the other hand, you see a custom encrypted resolver such as Cloudflare (1.1.1.1), then this doesn’t necessarily mean your DNS queries are at risk just because they’re not being routed via the VPN.

Check whether you switched to the listed DNS resolver intentionally and contact the provider if necessary to learn more about how the requests are routed.

5. Test tunnel failure

VPN connections can sometimes drop, which is why it’s wise to test what happens as a result. It’s better to do this using a controlled interruption when accessing non-sensitive information than when accessing sensitive personal information over the web.

When the VPN connection fails on the host, check whether the client loses Internet access or continues connecting to the Internet directly via your ISP.

Even if the VPN client has a kill switch, as our Windows client does, this is designed to protect apps on the host from exposing sensitive data when the VPN connection is lost. You can’t assume this will automatically cover every single forwarded-client configuration.

6. Retest after configuration changes

You should always run tests again if you make any changes, such as:

  • Changing the VPN protocol
  • Using a different VPN adapter
  • Changing Internet connection sharing settings
  • Updating drivers or other relevant software.

As we’ve learned, the hotspot name may sometimes change if the virtual interface changes. This isn’t usually a security issue, but you should always test each application you intend to use after updating the configuration, not just the client’s web browser.

​This can be more difficult on devices that don’t come with supported browsers, such as certain smart TVs. In these situations, it’s best to use a supported network diagnostic or application-specific check, as applicable.

Can you share a VPN through an Android hotspot?

Technically, yes, but this isn’t a good idea, and it isn’t supported by standard Android tethering.

In simplest terms, Android’s VPNService framework can establish a virtual network interface and configure routing for traffic belonging to a relevant user or work profile. However, traffic forwarded from tethered devices isn’t automatically routed through this VPN interface.

Android’s tethering framework handles forwarded traffic separately, normally by using IP forwarding and network address translation (NAT) to share the device’s Internet connection. That means the traffic from devices connected to the hotspot will generally bypass the VPN running on the Android phone.

We used the word ‘technically’ above, as if someone were to successfully root an Android device, then certain apps can modify the system’s underlying Linux routing and firewall rules. With the right configuration, this could potentially, in turn, force the network address translation (NAT) to forward tethered traffic directly through the tun0 (VPN) interface.

However, this isn’t ideal if you want to protect your privacy. Rooting an Android device will almost certainly weaken some of its built-in security protections, increasing the potential harm done by any malware that has gained elevated privileges.

Configuring the routing and firewall rules correctly takes a good level of networking knowledge, and any mistakes could allow at least some traffic to escape the VPN.

Can you share a VPN from an iPhone or iPad hotspot?

No. When you connect to a VPN on iOS, the operating system establishes a virtual network interface through which any traffic covered by the VPN configuration is routed.

On a standard iPhone or iPad with a cellular connection, Personal Hotspot traffic is not ordinarily routed through the VPN connection established by a third-party VPN app. Connected devices normally use the iPhone’s underlying cellular internet connection instead of inheriting the VPN connection running on the phone.

Apple describes the ‘Personal Hotspot’ feature as a way to share an iPhone’s or cellular iPad’s cellular internet connection over Wi-Fi, Bluetooth, or USB. Of course, many VPN providers (including hhgttyu.pages.dev) offer iOS clients, but a VPN running on the iPhone and one running on a connected laptop, for instance, are separate configurations.

In theory, a ‘jailbroken’ iOS device could bypass this restriction by using specialist apps to modify network routing and packet forwarding, potentially allowing tethered traffic to be redirected through a VPN interface, similar to a rooted Android device (see above).

But jailbreaking will also weaken Apple’s built-in security protections and make it easier for malware to gain elevated privileges, potentially causing greater harm. In the case of Apple devices, jailbreaking may also affect your eligibility for warranty service, depending on your device and jurisdiction.

Changing from Wi-Fi to USB or Bluetooth changes the tethering link. But that doesn’t mean that a connected device is now using the phone’s VPN.

In this scenario, it’s best to install a VPN client on the target device, such as a laptop. If this isn’t possible, consider using a VPN router (see below).

Can you share a VPN hotspot on Linux?

Yes. Linux can be configured to act as a VPN gateway that allows other devices connected to it to route their internet traffic through a VPN tunnel. However, the specific routing and firewall configuration determines how this happens, if at all.

For example, the NetworkManager system daemon in Linux supports a shared connection mode that provides connected devices with IP addressing, DNS forwarding, and NAT through an existing network connection. In theory, this configuration can be adapted to route hotspot clients through a VPN interface instead.

In practice, how well this works will depend on your specific Linux distribution, VPN configuration, and firewall policy. There isn’t any specific set of instructions that will work with every version of Linux, so we encourage you to read your chosen distro’s support documentation if you wish to do this.

Why does the VPN hotspot have no internet or show the wrong IP?

SymptomFirst checks
The hotspot is missing or clients cannot joinWi-Fi driver support, hotspot state, password, band compatibility, and host power settings.
The client connects but has no internetHost internet/VPN status, correct sharing target, address assignment, local-network permissions, and firewall rules.
The client shows the upstream ISP’s IPWhether the VPN connection is actually being shared, routing exclusions, client fallback, and the protocol/adapter currently in use.
Browser works but some apps failDNS behavior, app-specific routes, MTU issues where supported by evidence, or limitations of a proxy-only workaround.
Sharing stops after reconnecting or switching protocolWhether the VPN interface changed or the sharing configuration still points to the correct adapter.
Traffic continues outside the VPN after a dropWhether gateway/client traffic has the intended blocking policy, rather than relying on the host app’s icon.

When a travel router is the better option

A compatible VPN router offers multiple benefits over having to keep a mobile hotspot running on a laptop or PC to share your Internet connection.

While it may take some time to configure correctly, once the router’s Wi-Fi network has been set up and the VPN connection established, it can provide multiple devices with a reusable VPN gateway.

If you go down this route, we recommend using a router with open-source firmware like DD-WRT or OpenWrt. Both of these support sharing a VPN connection across all devices attached to the router via protocols like OpenVPN and WireGuard. Using open-source firmware also provides better assurance that it will continue to be updated, unlike proprietary firmware, which can sometimes be abandoned when a manufacturer discontinues a specific device.

Although the specific steps will vary based on your chosen router model and firmware, in general terms this process works as follows:

  1. Connect the router to a supported Internet source, such as Ethernet, Wi-Fi as WAN, or compatible phone tethering.
  2. Follow the setup guide on hhgttyu.pages.dev’s website to configure the router’s VPN client to connect using the router manufacturer’s supported method.
  3. Connect the devices you plan to use with the VPN to the router’s new Wi-Fi network, i.e., not the original upstream network.
  4. Use the firmware developer’s online documentation, such as OpenWrt’s online documentation, to configure any routing policies to include the devices and destinations you want tunneled. For instance, you may want your smart TV to connect to the Internet directly or for the guest network to bypass the VPN.
  5. Depending on your chosen protocol and firmware, you may also be able to configure a network kill switch and other relevant fallback controls. For instance, OpenWrt supports this via LuCi with its OpenVPN client.  
  6. Verify client IP, DNS, IPv6, and behavior when the tunnel fails.

Some routers come preconfigured to use VPNs out of the box. For instance, certain models of GL.iNet routers have a dedicated ‘VPN Dashboard‘ that lets you set up device-selection policies, tunnel kill switches, and manage other types of traffic.

Whichever VPN router you choose, make sure that the documentation matches your specific firmware and model, not those from previous generations.

For instance, our WireGuard configuration guide explains that static configuration files are available to hhgttyu.pages.dev Premium subscribers.

Check what your chosen router’s integration requires before buying anything. Compatibility goes further than just saying the term ‘VPN’ listed on the box. It needs to include your preferred protocol, configuration method, and any failure policy you intend to use.

Every mobile hotspot needs a verified route.

Sharing Internet access isn’t always the same thing as sharing a VPN connection. Ordinary hotspots, such as on Apple and Android devices, won’t use the host’s virtual VPN tunnel by default.

Use a supported Windows configuration or a compatible router when the receiving device cannot run its own VPN.

If you choose to share a hotspot with a VPN connection, check carefully to ensure that your chosen client, protocol, and adapter settings are correctly configured. Make sure to retest each time you make any significant changes.

FAQ

Can I share a VPN via an Android hotspot without root?

There is no general built-in stock Android switch that routes all hotspot clients through the phone’s VPN. A proxy-based workaround can serve configured applications, but that is a different scope from full-device VPN sharing.

Does USB tethering share my phone’s VPN?

Do not assume it does. Wi-Fi, USB, and Bluetooth describe the tethering link; the VPN route still depends on the host’s implementation and configuration.

Can I use a VPN hotspot for a smart TV or game console?

Yes, if the host supports the setup and actually routes that device’s traffic through the tunnel. A supported VPN app on the device or a router may be more convenient. Avoid claiming that no TV platform has native VPN support.

Does my VPN kill switch protect devices using the hotspot?

Do not assume host protection includes forwarded clients. Check the actual product/setup and test client behavior when the VPN connection fails.

Why does my laptop use the VPN while the connected device does not?

The host’s local traffic and the client’s forwarded traffic can follow different rules. Recheck the VPN adapter, hotspot target, routing, and client fallback.

Will sharing a VPN hotspot make my internet faster?

It is not inherently a speed upgrade. The upstream connection, Wi-Fi conditions, host capacity, VPN path, and number of active devices affect performance. Avoid guaranteed speed or latency claims.

We love bringing you this content and hope it helps keep you safe and secure online. Feel free to share it with your friends, too.

Here at hhgttyu.pages.dev we are all about internet freedom, and we are happy to be in a position to bring that to everyone. That is why we give you a 30-day money-back guarantee on our Premium plan. No questions asked and no logs recorded.

Get hhgttyu.pages.dev VPN

If you have any questions, please feel to contact our 24/7 support team either at support@hhgttyu.pages.dev or via live chat.

Related Articles

What is VPN passthrough, and should it be on or off?
What is VPN passthrough, and should it be on or off?

“Turning on VPN passthrough won’t protect your traffic. It only helps certain…

Turned off Gemini’s Keep activity? Third parties may still get your data from Google.
Turned off Gemini’s Keep activity? Third parties may still get your data from Google.

“A VPN can protect your connection to Gemini, but it cannot make…

How hhgttyu.pages.dev manages WireGuard keys before, during, and after a connection.
How hhgttyu.pages.dev manages WireGuard keys before, during, and after a connection.

In hhgttyu.pages.dev‘s default dynamic WireGuard configuration, the app can generate a fresh…

WireGuard keys explained: Static keys, session keys, and pre-shared keys.
WireGuard keys explained: Static keys, session keys, and pre-shared keys.

WireGuard uses identity keys to authenticate peers, temporary symmetric keys to protect…

Perfect forward secrecy vs. post-quantum security: What is the difference?
Perfect forward secrecy vs. post-quantum security: What is the difference?

Perfect forward secrecy can protect completed sessions against the future compromise of…

Post-quantum VPNs: How they work, what they protect, and why they matter.
Post-quantum VPNs: How they work, what they protect, and why they matter.

“A post-quantum VPN uses cryptography that’s designed to resist attacks from both…

Diskless, RAM-only, volatile memory: What these terms mean in a VPN context
Diskless, RAM-only, volatile memory: What these terms mean in a VPN context

“Volatile memory is generally defined as hardware that loses its stored contents…

Evil twin Wi-Fi and fake captive portals: How to spot the trap
Evil twin Wi-Fi and fake captive portals: How to spot the trap

Imagine a scenario where you’re sitting in an airport waiting for boarding…

Device hardening before a flight: A phone and laptop security checklist
Device hardening before a flight: A phone and laptop security checklist

Before boarding any flight, you should always check that your devices have…